Inbuilt Fridge Installation Procedure in Nairobi

Inbuilt refrigerators, also known as built-in or integrated fridges, are a popular choice for modern kitchens in Nairobi, offering a seamless and stylish integration with cabinetry. Installing these appliances requires precision, technical expertise, and adherence to specific guidelines to ensure optimal performance and longevity. This article, brought to you by MachineRepairNairobi.com, outlines the detailed procedure for installing an inbuilt fridge in Nairobi, along with associated charges.

Pre-Installation Requirements

Assessing the Space

Measure the cabinet space to ensure compatibility with the fridge dimensions. Most inbuilt fridges require a space of 24–36 inches in width, 24–28 inches in depth, and 70–84 inches in height, depending on the model. Verify the cabinet’s door split (50/50, 60/40, or 70/30) matches the fridge’s configuration. Check for a 3-pin electrical socket within 1 meter of the installation site and ensure proper ventilation space (at least 50mm at the rear and 25mm on the sides).

Tools and Materials

Essential tools include a flat-head screwdriver, spirit level, measuring tape, drill, and screws for securing the fridge. A water line installation kit is necessary for models with ice makers or water dispensers. Ensure anti-tip brackets and leveling screws are included or purchased separately.

Preparation

Unplug and remove the old appliance, if applicable, and clean the installation area. Confirm the floor is level and strong enough to support a fully loaded fridge (up to 500 pounds for some models). Allow the new fridge to stand upright for 4 hours post-delivery to let compressor oil settle.

Installation Procedure

Step 1: Unpacking and Inspection

Carefully unbox the fridge and inspect for damage. Remove all packaging materials, including internal wrapping, to avoid interference with components. If the fridge has a water dispenser or ice maker, ensure the water line kit is included.

Step 2: Positioning the Fridge

Place a protective layer, such as cardboard, under the fridge’s legs to prevent floor damage. Carefully slide the fridge into the cabinet space, ensuring it aligns flush with the surrounding cabinetry. For tight spaces, remove the fridge doors temporarily, following the manufacturer’s manual, and reattach once positioned.

Step 3: Leveling the Appliance

Use a spirit level to check the fridge’s alignment. Adjust the front leveling screws with a flat-head screwdriver, turning clockwise to raise or counterclockwise to lower each leg. Ensure the front is slightly higher than the rear for optimal door closure and to prevent tipping. Secure anti-tip brackets to the cabinet or wall to enhance safety.

Step 4: Connecting to Power and Water

Plug the fridge into a 3-pin socket within 1 meter. If an extension cord is needed, use a heavy-duty one rated for the appliance’s power requirements. For fridges with water dispensers or ice makers, connect the water line to a cold water supply using a copper or PEX tubing kit. Test for leaks and ensure proper water flow.

Step 5: Attaching Cabinet Doors

For integrated fridges, attach the cabinet door to the fridge door using either fixed or sliding hinges, matching the existing setup. Fixed hinges connect directly to the cabinet door, while sliding hinges glide along the cabinet’s back. Adjust the hinges to ensure smooth opening and closing, and verify the door split aligns with the cabinet.

Step 6: Testing and Final Adjustments

Do not turn on the fridge immediately; allow it to stand for 4 hours to let cooling gases settle. After this period, switch it on and check that it cools effectively. Test the water dispenser or ice maker, if applicable, and ensure all shelves and compartments are secure. Make minor leveling adjustments if needed.

Step 7: Cleanup and Recycling

Remove all packaging materials and clean the installation area. If recycling the old appliance, ensure it is disconnected and ready for pickup. MachineRepairNairobi.com offers recycling services for an additional fee, adhering to WEEE regulations.

Charges for Inbuilt Fridge Installation in Nairobi

The cost of inbuilt fridge installation in Nairobi varies based on the fridge type, complexity, and additional services. Below is a detailed breakdown of charges:

Note: Prices are indicative and may vary based on the fridge’s brand, model, and specific site conditions. Contact MachineRepairNairobi.com at 0725570499 for precise quotes.

Post-Installation Tips

• Wait Time: Allow the fridge to run for 24 hours before loading it with food to stabilize the temperature.
• Maintenance: Regularly clean the condenser coils and check the door gasket for wear to maintain efficiency.
• Warranty: Ensure the installation is performed by certified technicians to avoid voiding the manufacturer’s warranty.
• Professional Assistance: For complex installations involving plumbing or cabinet modifications, hire experienced technicians from MachineRepairNairobi.com to ensure safety and compliance.

Why Choose MachineRepairNairobi.com?

Our team of certified technicians in Nairobi specializes in inbuilt fridge installations across brands like Samsung, LG, Bosch, and Armco. We provide mobile services across Nairobi, Kiambu, Machakos, and surrounding areas, ensuring prompt and reliable installations. Our expertise guarantees a seamless fit, proper leveling, and functional testing, with a focus on customer satisfaction.